Analysis of the Cooling Tower Ventilator in the MATLAB Software

Authors

  • Shohzodbek S. Sanaev Tashkent State Technical University, Tashkent, Uzbekistan
  • Javokhir I. Botirov Tashkent State Technical University, Tashkent, Uzbekistan
  • Saida’zam S. Xojayev Tashkent State Technical University, Tashkent, Uzbekistan

DOI:

https://doi.org/10.51699/emjms.v26i3.41

Keywords:

Cooling tower, cooling device, heat balance, heat exchange

Abstract

The article describes the construction of a computer model for an open-type heat exchange-tube fan cooling tower. This model incorporates units for calculating the temperature of the liquid within the heat exchange-tube pipe, the air temperature, as well as blocks for mass exchange and equilibrium conditions. These enhancements aim to improve the accuracy and reliability of temperature calculations within the cooling tower system.

References

A. Laptev and M. Varakhov, Hydromechanical process and petroleum industry and energy. Posobiye k raschetu apparatusov. Kazan: Izd-vo Kazan. Un-ta, 2008. [Online]. Available: https://ingehim.ru/images/Laptev_Farakhov_2008_Hydromechanical_processes_in_petrochemistry_and_power_engineering.pdf

A. Pushnov and A. Kagan, Structure and hydrodynamics of column apparatus and nasadkoy. Introduction to chemical engineering. SPb.: Iz-vo polytechnic. Un-ta, 2011.

A. Artikov, Introduction to systematic analysis. 2016.

A. Kagan, A. Pushnov, and L. Yudina, “K voprosu o svyazi hydravlicheskogo soprotivleniya irregularyx teplomassoobmennyx nasadok s ix effektivnostyu,” Khimicheskaya Promyshlennost, vol. 88, no. 2, pp. 75–81, 2011.

A. Artikov, X. Djurayev, Z. Masharipova, and B. Barakayev, Systematic thinking, analysis and optimal solutions (or primerax engineering technology). Bukhara: Publishing house “Durdona,” 2020.

A. Artykov, Computer method analysis and synthesis of chemical and technological systems. Tashkent: Voris publishing house, 2012.

A. Laptev, N. Nikolayev, and M. Basharov, Methody intensifiksii i modelirovaniya teplomassoobmennyx i modelirovaniya teplomassoobmennyx protsesov: ucheb.-sprv. Allowance. M.: Teploteknik, 2011.

Downloads

Published

2024-03-06

How to Cite

Sanaev, S. S., Botirov, J. I., & Xojayev, S. S. (2024). Analysis of the Cooling Tower Ventilator in the MATLAB Software. European Multidisciplinary Journal of Modern Science, 26(3), 1–5. https://doi.org/10.51699/emjms.v26i3.41

Issue

Section

Articles